Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 241)

Call Control Commands
Automatic Dialing with DTR %Dn
©Restricted
Page: 51 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
12.10 Automatic Dialing with DTR %Dn
12.10.1 Description
This command enables and disables:
• automatic dialing of the phone number stored in the first location of the ADN
phonebook (or FDN phonebook, if it is activated using +CLCK command),
• automatic sending of the short message (SMS) stored in the first location of the
SIM.
The number is dialed when DTR OFF switches to ON.
The short message is sent when DTR OFF switches to ON.
12.10.2 Syntax
Action command
AT%D[;]
OK
Read command
None
Test command
None