Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 732)

APPENDIXES
Examples
© Restricted
Page: 26 / 80
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 APPENDIXES August 23, 2007
Command Response
AT+CPBR=1,80
Note: Read all entries (only the ones set are
returned).
+CPBR:1,"0346572834",129,"Dolores
Claiborne"
+CPBR:2,"1284374523",129,"Thad
Beaumont"
+CPBR: 3,"4356729012",129,"Carry"
OK
2.6.3 Example 3: Find Phonebook Entries
Command Response
AT+CPBF=?
Note: Get the phonebook type.
+CPBF: 20,14
OK
Note: Max length of 20 for the phone number, 10
characters for the text.
AT+CPBF="D"
Note: Read entries starting with "D".
+CPBF: 1,"0346572834",129,"Dolores Clairborne"
OK
AT+CPBF="W"
Note: Read entries with "W".
+CME ERROR: 22
Note: Entry not found.
2.6.4 Example 4: Phonebook and Custom Character Set
The Custom To Extended GSM conversion table and the Extended GSM To Custom
conversion table can be used to display the extended GSM characters:
| ^ € { } [ ] ~ \
To manage one of these extended characters, the character 0x1B must be set in the
right place (in the position corresponding to the value of the ASCII code) in the
Custom to GSM conversion table (instead of 0x20 (space ASCII code)).
For example, the ASCII code of \ (backslash) is 0x5C, the character 0x1B must be set
at the position 0x5C of the Custom to GSM conversion table. The range of character
0x5C in this table is 92. So to update the table the command AT+WCCS=1,0,92 will
be used.
In the other way, write the space ASCII code 0x20 in the right place in the Custom to
GSM conversion table if an extended character is not needed.