Example of a multiparty call, Appendixes, 5 example of a multiparty call – Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 730
APPENDIXES
Examples
© Restricted
Page:
24 / 80
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
APPENDIXES
August 23,
2007
2.5 Example of a Multiparty Call
When the ME is powered on and the SIM PIN has been entered.
AT+CMEE=1
Enable the report mobile equipment errors
OK
AT+WIND=63
Ask to display the general indications
.
OK
AT+CCWA=1,1
Enable call waiting
.
OK
ATD>"John Panborn";
+WIND: 5,1
Indication of call
.
+WIND: 2
Remote party is ringing
.
OK
Call setup was successful
…Conversation (call1)…
+WIND: 5,2
Indication of another call
.
+CCWA: "+33595984834",145,"Dolores Claiborne"
Another call is waiting
.
AT+CHLD=2
Put first call on hold and answer the second one
.
OK
…Conversation (call2)…
AT+CHLD=3
Every call is part of a multiparty conversation
.
OK
AT+CHLD=11
Release the first call (with John Panborn) and recover the second call (with
Dolores Claiborne
)
…Conversation (call2)…
ATH
Release the second call
.