Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 517)

Supplementary Services Commands
Calling Line Identification Presentation +CLIP
©Restricted
Page: 171 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
20.3.3 Parameters and Defined Values
: CLIP mode in the TA
0 disable (default value)
1 enable
: subscriber CLIP service status in the network
0 CLIP not provisioned
1 CLIP provisioned
2 unknown (no network…)
: phone number
string type
: TON/NPI for
145 international number
includes the international access code character "+".
129 national number
does not include the international access code
character "+".
subaddress
string type
: TON/NPI for
145 international number
includes the international access code character "+".
129 national number
does not include the international access code
character "+".
: phonebook name associated with
string type
: CLI validity
0 CLI valid
1 CLI has been withheld by the originator
2 CLI is not available due to interworking problems or limitation
of originating network.
20.3.4 Parameter Storage
The parameter is stored in EEPROM using AT&W command. The default value
can be restored using AT&F.