Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 610)

Audio Commands
Ring Melody Playback +CRMP
©Restricted
Page: 62 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
21.19.3 Parameters and Defined Values
:
call type
0 incoming voice call
1 incoming data call
2 incoming fax call
3 incoming short message (SMS)
: volume
0-15 min: 0
max 15
default value: 6
: melody type
0 manufacturer defined (default value if omitted)
: melody index
0 stop melody playback
1-10 melody ID (default value if omitted: 1)
Range of values is 1 to 10 for voice/data/fax call type, and 1 to
2 for short messages.
21.19.4 Parameter Storage
None.
21.19.5 Examples
Command Responses
AT+CRMP=0,7,0,2
Note: Play voice call melody index 2 with volume level 7.
OK
Note: Melody playback.
AT+CRMP=0,,,0
Note: Stop the melody.
OK
Note: The melody is stopped.
AT+CRMP=? +CRMP: (0-3),(0-15),0,(0-10)
Note: Supported parameters
OK