Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 67)

Global Configuration Commands
Auto Shutdown: +WASR
©Restricted Page: 61 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.4.3 Defined Values
: requested operation
0 disable the auto shutdown feature on
if is missing, all the available ports status will be
disabled
1 enable the auto shutdown feature on using the
GPIO and the wake-up time
if , and/or are missing, the
current values (the previous values set) will be used
2 get the auto shutdown feature status on
if is missing, all the available ports status will be
listed.
: UART port identifier
1 UART1
Note: Currently only UART1 supports the Auto Shutdown
Feature
: GPIO name
1 to 44 GPIO Id
range: 1-44 (default value: 24)
If this parameter is missing, the current setting will be
used.
: wake-up time of the external transceiver
t1 time delay to wake up the UART transceiver before
displaying the unsolicited response in 30 micro second
(μs) steps
range: 1-15 (default value: 6 (180μs))
If this parameter is missing, the current setting will be
used
: current functionality status
0 auto shutdown feature disabled on
(default value)
1 auto shutdown feature enabled on