Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 242)

Call Control Commands
Automatic Dialing with DTR %Dn
©Restricted
Page: 52 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
12.10.3 Parameters and Defined Values
:
automatic dialing mode
0 disables automatic DTR number dialing/message transmission
1 enables automatic DTR dialing if DTR switches from OFF to
ON
Dials the phone number in the first location of the ADN
phonebook (or FDN phonebook, if it is activated using +CLCK
command).
voice call (with semi-colon)
data or Fax call (without semi-colon)
2 activates automatic DTR short message transmission if DTR
switches from OFF to ON
Sends the short message in the first location of the SIM (even
if the current selected SMS memory is not SM in +CPMS
command).
; for voice call
If omitted, the call will be a data or a fax one.
12.10.4 Parameter Storage
None.
12.10.5 Examples
Command Responses
AT%D1;
Note: Activates DTR voice number dialing
OK
Note: Command has been executed
DTR is OFF
DTR switches ON
Note: The number in the first location of the ADN
is dialed automatically
DTR switches OFF
Note: The product goes on-hook
OK
AT%D2
Note: Activates DTR short message sending
OK
Note: Command has been executed
DTR is OFF
DTR switches ON
Note: The first short message is sent
+CMSS: 1