Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 284)

GPRS Commands
Define PDP Context +CGDCONT
©Restricted
Page: 94 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
14.3 Define PDP Context +CGDCONT
14.3.1 Description
This command specifies PDP context parameter values for a PDP context identified by
the local context identification parameter.
Four PDP contexts can be defined through Wavecom OS.
14.3.2 Syntax
Action command
AT+CGDCONT=[,[,[,[,
[,]]]]]
OK
Read command
AT+CGDCONT?
+CGDCONT: ,,,,,
[+CGDCONT: ,,,,,
[…]]
OK
Test command
AT+CGDCONT=?
+CGDCONT: (list of supported s),,,,(list of
supported s),(list of supported s)
[+CGDCONT: (list of supported s),,,,(list of
supported s),(list of supported s)[…]]
OK