Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 123)

Wireless CPU ® Status Commands
General Indications +WIND
©Restricted Page: 117 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
: call identifier
integer value
: phonebook memory storage
"SM" ADN
"FD" FDN
"ON" MSISDN
"SN" Service Number
"EN" Emergency Number
: phonebook status after initialization
0 not reloaded from SIM (no change since last init or SIM
removal)
1 reloaded from SIM to internal memory (at least one entry has
changed)
: 128-bit "fingerprint" of the phonebook
The checksums are presented in the following order : SM, FD,
ON, SN, EN, LD. If the phonebook is not present in the SIM, the
checksum is empty.
: interruption identifier
0 INT0
1 INT1
: state of the edge in case of both edge (the interruption happens
with a high to low and low to high edge) (please refer to +WIPC
command description)
0 interruption happens with high to low edge
1 interruption happens with low to high edge
: long alphanumerical format name received from the NITZ
message
string type
: short alphanumerical format name received from the NITZ
message
string type
: difference, expressed in quarters of an hour, between the local
time and GMT.
signed integer