Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 521)

Supplementary Services Commands
Connected Line Identification Presentation +COLP
©Restricted
Page: 175 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
20.5 Connected Line Identification Presentation +COLP
20.5.1 Description
This command enables the COnnected Line identification Presentation supplementary
service. This can be useful for call forwarding of the connected line. When
presentation of the connected line identification is enabled (and the calling subscriber
allows the function), +COLP unsolicited response is returned in response of an ATD
command.
20.5.2 Syntax
Action command
AT+COLP=
OK
Read command
AT+COLP?
+COLP: ,
OK
Test command
AT+COLP=?
+COLP: (list of supported s)
OK
Unsolicited response
+COLP: ,[,,[,]]