Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 68)

Global Configuration Commands
Auto Shutdown: +WASR
©Restricted Page: 62 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.4.4 Parameter storage
The , , and parameters are stored in EEPROM
without using AT&W. Default values can be restored using AT&F.
Notes:
For products that have the Autoshutdown enabled during production, like Fastrack
Supreme, the parameter is not restored by the AT&F command.
6.4.5 Examples
Command Responses
AT+WASR=? +WASR: (0-2),1,(1-44),(1-15)
OK
AT+WASR? +WASR: 0,1,24,6
OK
AT+WASR=1,1,18,10
Note: The Auto Shutdown feature is activated
on UART1 using GPIO18 and the wake-up
time is set to 300 μ s
OK
AT+WASR=2,1
Note: Get the Auto Shutdown feature status of
UART1
+WASR:1,1,18,10
OK
AT+WASR=0,1
Note: The Auto Shutdown feature is
deactivated on UART1
OK
AT+WASR=1
Note: Enable the Auto Shutdown feature with
current UART, GPIO and timing
OK
AT+CFUN=1
Note: Reset the Wireless CPU ®
OK
AT+WASR=2
Note: Get the Auto Shutdown features status
of all UART ports
+WASR:1,1,18,10
OK
AT&F
Note: Restore factory settings
OK