Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 218)

GSM Network Commands
Wavecom Location +WLOC
©Restricted
Page: 28 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
11.6.5 Examples
Command Responses
AT+WLOC=3,255
Note: Set the information to display (255 ->
complete information)
OK
AT+WLOC=1
Note: Displays the local information once
+WLOC:
02f802,0006,7772,f13101b04cf51278
91138e95a846d160,8b49d08d0797c419e
272e10889a000009302170399020403c1
020a03c5020a03,00,010121111349ff
OK
AT+WLOC=2,10
Note: Displays OK then the current local
information immediately for the first time and
then every 10 seconds.
OK
+WLOC:
02f802,0006,7772,ed3001af4cf492780
b040889c74acc23,8b49d08d0797c419e2
72e1
0889a000009302160399020503c1020a0
3c5020a03,00,010121111354ff
+WLOC:
02f802,0006,7772,f02d01ae4cf41278
4b03c889c846dba5,8b49d08d0797c
419e272e10889a0000093021703990
20403c1020a03c5020903,00,010121
111404ff
AT+WLOC? +WLOC: 1,10,255
OK
Note: The location is in automatic mode, the period value is
set to 10 seconds, the configuration value is set to 255.
AT+WLOC=0
Note: Stops the display of local information
OK