Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 259)

Data Commands
DTE-DCE Local Rate Reporting +ILRR
©Restricted
Page: 69 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
13.3.3 Parameters and Defined Values
: local port rate report
0 disable (default value)
1 enable
: current (negotiated or renegotiated) DTE-DCE speed rate
values in bps
300
600
1200
2400
4800
9600
19200
38400
57600
115200
230400
460800
921600
13.3.4 Parameter Storage
The parameter are stored in EEPROM using the AT&W command. The
default value can be restored using AT&F.
13.3.5 Examples
Command Responses
AT+ILRR=? +ILRR: (0,1)
OK
AT+ILRR=0 OK
Note: Local port rate report disabled Note: Command valid
AT+ILRR=1 OK
Note: Local port rate report enabled Note: Command valid