Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 19)

Introduction
©Restricted Page: 13 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
1.4.2 Definitions
The words "Mobile Station" (MS) or "Mobile Equipment" (ME) are used for mobile
terminals supporting GSM/GPRS services.
Terminal Equipment is the Man-Machine Interface of a GSM/GPRS device (modem or
handset). A TE can be a handset MMI or the AT command line interface.
User
GSM/GPRS
network
ME TE
WAVECOM product
A call from a GSM/GPRS mobile station to the PSTN is called a "mobile originated call"
(MOC) or "outgoing call", and a call from a fixed network to a GSM/GPRS mobile
station is called a "mobile terminated call" (MTC) or "incoming call"
In this document, the word "product" refers to any Wavecom product supporting the
AT commands interface.
1.4.3 Logos
This picture indicates the +WIND indication from which the AT
command is allowed. X values can be: 1, 3, 4, 16.
This picture indicates that a SIM card must be inserted to support the AT
command.
This picture indicates that an AT command is supported even if the SIM
card is absent.
This picture indicates that the PIN 1 /CHV 1 code must be entered to
support the AT command.
This picture indicates that an AT command is supported even if the
PIN 1 /CHV 1 code is not entered.
This picture indicates that the PIN 2 /CHV 2 code must be entered to
support the AT command.
This picture indicates that an AT command is supported even if the
PIN 2/CHV 2 code is not entered.