Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 327)

PLMN Commands
Selection of Preferred PLMN list +CPLS
©Restricted
Page: 137 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
15.1.3 Parameters and Defined Values
:
preferred PLMN list
0 user controlled PLMN selector with access technology
EF_PLMNwAct
If this file is not found EF_PLMNSel will be selected.
1 operator controlled PLMN selector with access technology
EF_OPLMNwAct
2 home PLMN selector with access technology EF_HPLMNwAct
15.1.4 Parameter Storage
None.
15.1.5 Examples
Command Responses
AT+CPLS?
Note: Ask for selection of the SIM file
+CPLS: 1
OK
Note: EF_OPLMNwAct is selected
AT+CPLS=0
Note: Selection of EF_PLMNwAct
OK
Note: If EF_PLMNwAct is not present, EF_PLMNsel
will be selected
AT+CPLS=1
Note: Selection of EF_OPLMNwAct
+CME ERROR: 3
Note: EF_OPLMNwAct is not present
AT+CPLS=?
Note: Get possible values
+CPLS: (0,1,2)
OK
Note: The 3 files with Access technology are
present and can be selected
AT+CPLS=?
Note: Get possible values
+CPLS: (0)
OK
Note: Only EF_PLMNwAct or EF_PLMNsel can be
selected