Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 293)

GPRS Commands
Request GPRS IP Service D
©Restricted
Page: 103 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
14.6.4 Parameter Storage
None.
14.6.5 Examples
Command Responses
ATD*99***1# CONNECT
14.6.6 Notes
If is supported, its usage is the same as in the +CGDATA command. The
+CGDCONT, +CGQREQ, etc. commands may then be used in the Wireless CPU
®
initialization AT command string to set values for PDP type, APN, QoS etc…
If is not supported or is supported but omitted, the MT attempts to activate the
context using the 'Empty PDP type' (GSM 04.08, refer to [8] ). No PDP address or APN
is sent in this case and only one PDP context subscription record is present in the
HLR for this subscriber.
If a GPRS PPP session is already running, the setting of a CSD (GSM data call) is not
supported.