Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 44)

Open AT ® Commands
Wavecom Open AT ® Control Command +WOPEN
©Restricted Page: 38 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
5.2 Wavecom Open AT ® Control Command +WOPEN
5.2.1 Description
This Wavecom proprietary command performs the start, stop, delete, and get
information about the current Open AT ® embedded application.
This command also erases the Open AT ® flash objects storage place, and configures
the Application & Data (A&D) storage place size. Please refer to the Open AT ®
development guides for more information.
This command permits to configure the Open AT ® Safe Boot, this service prevents the
Open AT ® application from starting when defined keys of the keyboard are pressed.
5.2.2 Syntax
• If =0,1,3,4 or 5
Action command
AT+WOPEN=
OK
• If =2
Action command
AT+WOPEN=
+WOPEN: ,[,]
OK
• If =6
Action command
AT+WOPEN=[,]
+WOPEN: ,,
OK