Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 138)

Wireless CPU ® Status Commands
Wavecom Status Request +WSTR
©Restricted Page: 132 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
7.7 Wavecom Status Request +WSTR
7.7.1 Description
This Wavecom proprietary command returns some operation status. It can be used to
check the state of the initialization sequence and the network status.
7.7.2 Syntax
Action command
AT+WSTR=
+WSTR: ,
OK
Read command
None
Test command
AT+WSTR=?
+WSTR: (list of supported s)
OK
7.7.3 Parameters and Defined Values
: requested status
1 initialization sequence status
2 network status
: current status
For =1 For=2
0 not started no network
1 ongoing network available
2 finished
7.7.4 Parameter Storage
None.