Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 402)

Phonebooks Commands
Set Voice Mail Number +CSVM
©Restricted
Page: 56 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
16.13.3 Parameters and Defined Values
:
voice mail number mode
0 disable the voice mail number (default value)
1 enable the voice mail number
: phone number in ASCII format
string type
: TON/NPI for
145 international number
includes the international access code character
"+".
129 national number
does not include the international access code
character "+".
16.13.4 Parameter Storage
All parameters are stored in EEPROM. The default value can be restored using AT&F.
16.13.5 Examples
Command Responses
AT+CSVM=?
Note: Possible values ?
+CSVM: (0-1),(129,145)
OK
Note: Activation/deactivation and format 129 & 145 are
supported
AT+CSVM=0,"888",129
Note: Disable Voice Mail number and change value
to "888".
OK
AT+CSVM?
Note: Get mail number
+CSVM: 1,"888",129
OK
Note: Voice mail number "888" is activated