Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 150)

Serial Port Commands
DCE Response Format V
©Restricted Page: 144 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
8.6 DCE Response Format V
8.6.1 Description
This command determines whether the DCE response format uses or not the header
characters , and whether the result codes are provided as numeric or
verbose.
8.6.2 Syntax
Action command
ATV
OK
Read command
None
Test command
None
8.6.3 Parameters and Defined Values
: format control parameter
information responses result code
0 code>
1 (default
value)
.
8.6.4 Parameter Storage
The parameter is stored in EEPROM using AT&W command. The default value
can be restored using AT&F.