Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 529)

Supplementary Services Commands
Unstructured Supplementary Service Data +CUSD
©Restricted
Page: 183 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
20.7.3 Parameters and Defined Values
: requested operation
0 disable the result code presentation (default value)
1 enable the result code presentation
2 cancel session (not applicable to read command
response)
: USSD status
0 no further user action required (network initiated USSD-
Notify, or no further information needed after mobile
initiated operation)
1 further user action required (network initiated USSD-
Request, or further information needed after mobile
initiated operation)
2 USSD terminated by network
3 other local client has responded
4 operation not supported
5 network timeout
: USSD string
converted in the selected character set (please refer to
+CSCS)
string type
: data coding scheme
integer type
Refer to [5] for more information.
20.7.4 Parameter Storage
The parameter is stored in EEPROM without using AT&W. The default value can
be restored using AT&F command.