Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 145)

Serial Port Commands
DTE-DCE Character Framing +ICF
©Restricted Page: 139 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
8.3.3 Parameters and Defined Values
: character framing format
1 8 data 2 stop
parameter is ignored.
2 8 data 1 parity 1 stop
if no provided, 3 is used by default as value .
3 8 data 1 stop
parameter is ignored.
default value
4 7 data 2 stop
parameter is ignored.
5 7 data 1 parity 1 stop
if no provided, 3 is used by default as value.
6 7 data 1 stop
parameter is ignored .
: character framing parity
0 odd
1 even
2 mark
3 space
4 none (default value)
8.3.4 Parameter Storage
The and parameters are stored in EEPROM using AT&W
command. The default value can be restored using AT&F.