Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer - Manual (Page 88)

DC=john,DC=example,DC=com
● If left blank, the machine automatically starts search from an arbitrary position.
[Use TLS]
Select this checkbox to encrypt communication with the LDAP server using TLS.
● For an LDAP server for search, this is enabled only when [Use] or [Use (Security Authentication)] is selected
in [Login Information] in 8 below.
● For an LDAP server for authentication, this is enabled only when [Use] is selected in [Login Information] in
8 below.
[Port Number]
Enter the port number used to communicate with the LDAP server.
7
Set the time until timeout and attributes, as needed.
LDAP Server for Search
[Search Timeout]
Enter the time from search start to timeout in seconds.
LDAP Server for Authentication
[Authentication/Attribute Acquisition Timeout]
Enter the time from start of authentication and attribute acquisition to timeout in seconds.
[User Name Attribute]
Enter the attribute name to be compared with a user name entered during authentication using single-byte
alphanumeric characters.
Input example:
sAMAccountName
* This is not required if [Use (Security Authentication)] is selected in [Login Information] in Step 8.
[E-Mail Address Attribute]
Enter the attribute name to be used for obtaining an e-mail address from the authentication server, using
single-byte alphanumeric characters.
Input example:
mail
8
Configure the login information of the LDAP server.
LDAP Server for Search
[Login Information]
Specify whether to use the login Information for LDAP server authentication.
● When [Use] or [Use (Security Authentication)] is selected, set a user name and password.
● To use data obtained with the Kerberos protocol for the authentication password, select [Use (Security
Authentication)]. The clock of the machine must be synchronized with that of the LDAP server.
● If you specified an IP address for [Server Address] in 5, select as follows according to the support status of
your DNS server:
● If the DNS server supports only forward lookup, select [Do Not Use] or [Use].
● If you select [Use (Security Authentication)], make sure that the DNS server supports reverse lookup.
[Display Authentication Screen When Searching]
Setting Up
78