Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer - Manual (Page 59)

● When connecting to a wired LAN, configure the wired LAN connection settings after exiting the Setup Guide.
Selecting Wired or Wireless LAN(P. 52)
2
Select the Wireless LAN connection type, and connect to the Wireless LAN.
➠ When the connection to the wireless LAN is completed, the Toner Replenishment Service confirmation
screen is displayed.
Depending on your wireless LAN router, the connection type and security standards may vary. Check for a
connection type and security standard that are supported by both the wireless LAN router and the machine,
and then establish a connection according to the connection type. For the standards and procedure, see the
following:
Connecting to a Wireless LAN(P. 54)
Step 6: Configuring Settings for Toner Replenishment Service
You can configure settings for toner replenishment service. Through toner replenishment service, new toner
cartridges are automatically delivered to you before your existing toner cartridges are used up.
* Use of the toner replenishment service requires prior registration with select retailers. This service is only available in
certain countries.
* This service can be set up through [Toner Delivery Settings] displayed on the [Home] screen. [Home]
Screen(P. 111)
1
On the confirm screen of toner replenishment service, press [Next].
2
Press [Accept].
If you press [Do Not Accept], the screen for configuring settings for toner replenishment service is skipped
and the Setup Guide proceeds to step 7.
3
Press [OK].
➠ The [Application Library] screen is displayed.
● If connecting to the server fails, try configuring the settings again through [Connect to Server/Verify
Connection with Server] in [Toner Delivery Settings]. [Home] Screen(P. 111)
Step 7: Viewing an Overview of the Application Library and Setup Method
1
On the [Application Library] screen, you can see a description of each function.
● Press [See More Info.] to see an overview of each function in the Application Library. Press [About Remote UI]
to see the setup method of the Application Library.
● For more information, see the manual of the Application Library. You can display the manual by pressing
[User's Manual] and scanning the displayed QR code with a mobile device.
2
Press [End].
➠ The settings configured in the Setup Guide are applied.
When you exit the Setup Guide, the [Home] screen is displayed. [Home] Screen(P. 111)
Setting Up
49