Preparing to print from a computer, Preparing to print from a computer(p. 195), Step 1: installing the driver to the computer – Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer User Manual
Page 205
Preparing to Print from a Computer
84CU-0A1
Make the following preparations for the computer that will be used to print.
Step 1: Installing the Driver to the Computer
Using a Print Server in Windows
Use a print server to install the printer driver.
Double-click the shared printer on the print server, and follow the instructions on the screen to install the
printer driver. Displaying a Shared Printer in the Print Server(P. 738)
Changing the Port Type and Number (Windows)
●
If the machine is configured not to use LPD or RAW, or if the port number was changed, the settings on the
computer may also have to be changed. Changing the Port Type and Number(P. 200)
If the IP Address of the Machine Is Changed after Installing the Printer Driver
●
In Windows, the required action depends on the port you are using.
- If you are using an MFNP port, the connection is maintained as long as the machine and computer belong
to the same subnet, so no action is required on the computer.
- If you are using a standard TCP/IP port, you must add a new port. Adding a Port(P. 198)
If you do not know which port is being used, see the following:
Viewing the Printer Port(P. 743)
●
In macOS, you must re-register the machine on the Mac. For details about registering the machine, see the
manual of the driver at the online manual site.
https://oip.manual.canon/
* If you are using DHCP to automatically obtain the IP address of the machine, the IP address may be changed
automatically.
Step 2: Using a Driver to Set the Department ID and PIN
When Department ID Management is enabled on the machine, set the Department ID and PIN by specifying the
printer driver. Setting the Department ID and PIN on a Computer(P. 366)
* You can skip this step when not using Department ID Management. Proceed to Step 3.
Step 3: Configuring the Option Settings of the Machine Using the Driver
When optional equipment is installed to the machine, you must configure the option settings in the printer driver in
advance.
In Windows, normally, the option settings are configured automatically when the printer driver is installed.
Use the following procedure to configure the option settings when the option settings have not been configured at
installation, optional equipment has been installed after installation of the printer driver, or when using macOS.
Printing
195