Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer User Manual

Page 76

[Select Protocol]
Normally, set to [DHCP]. However, when [DHCP] is set in an environment where DHCP cannot be used,
the machine will continue to confirm Auto Acquire in the network, creating unnecessary communication.
When not using DHCP, set this to [Off].

[Auto IP]
Normally, set to [On]. Although priority is given to the IP address allocated with DHCP, if there is no
response from DHCP, Auto IP will be used.

Press [Apply].

Press [OK].

Restart the machine. Restarting the Machine(P. 104)

➠

The settings are applied.
Perform a connection test to check whether the IPv4 address is correctly configured. Checking the
Network Status and Settings(P. 88)

Checking the Currently Set IP Address

●

On the screen in Step 3, press [Check Settings] to check the current IP address setting. If the IP address is
displayed as "0.0.0.0," it is not correctly configured.

If the IP Address Is Changed after Installing the Printer Driver

●

In Windows, the required action depends on the port you are using.
- If you are using an MFNP port, the connection is maintained as long as the machine and computer belong

to the same subnet, so no action is required on the computer.

- If you are using a standard TCP/IP port, you must add a new port. Adding a Port(P. 198)
If you do not know which port is being used, see the following:

Viewing the Printer Port(P. 743)

●

In macOS, you must re-register the machine on the Mac. For details about registering the machine, see the
manual of the driver at the online manual site.
https://oip.manual.canon/

* If you are using DHCP to automatically obtain the IP address of the machine, the IP address may be changed
automatically.

Setting Up