Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer - Manual (Page 448)

Starting Remote UI
84CU-02J
To use Remote UI, enter the IP address of the machine into a Web browser on a computer, and log in with System
Manager Mode or General User Mode. The functions available with Remote UI vary depending on the mode you
logged in to.
When Department ID Management is set up, you must log in with the Department ID. The mode to which you are
logging in varies depending on the System Manager ID settings.
Required Preparations
● Check the operating environment of Remote UI. Supported Environment(P. 37)
● Connect the computer you are using to operate Remote UI to the machine over a network. Setting Up the
Network(P. 50)
● Check the IP address of the machine. Checking the Network Status and Settings(P. 88)
When Department ID Management Is Not Set Up
● To log in with Remote UI, you must set the Remote UI Access PIN on the machine. Setting the PIN to Use
for Remote UI(P. 422)
1
From a Web browser on a computer, access the following URL.
http:///
➠ The Remote UI login screen appears.
When Remote UI communication is encrypted, a warning message about the security certificate may
appear. If there are no problems with the certificate or TLS settings, you can continue operations.
When entering an IPv6 address, enclose the IP address in brackets [ ].
Example:
http://[fe80:2e9e:fc ff :fe4e:dbce]/
If the Remote UI Login Screen Is Not Displayed
When a message such as [Cannot access Remote UI.] is displayed and the login screen is not displayed, see
the following:
Cannot Access Remote UI or Send Function Setting Tool(P. 692)
2
Enter the items required for login.
When Department ID Management is not set up
Select [System Manager Mode] or [General User Mode], and enter the required items according to the setting
status.
Managing the Machine
438