An error occurred during certificate verification – Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer User Manual
Page 708
Direct Connection terminated.(P. 708)
Easy Connection via PC ended due to timeout The device will restart.(P. 708)
End of Cartridge Lifetime(P. 709)
Faxing is restricted.(P. 709)
ITB is near end of lifetime. Replcmt. is not yet needed.(P. 709)
Load paper.(P. 709)
Low Cartridge Level(P. 709)
Memory Full (Secure Print)(P. 710)
Memory Full (Skip Error)(P. 710)
Memory Media Print is restricted.(P. 710)
No reply from the destination.(P. 711)
No response from the host.(P. 711)
Paper jammed.(P. 711)
Paper Settings and Loaded Size Mismatch(P. 711)
Prepare cartridge.(P. 712)
Printing is restricted.(P. 712)
Problems resulting from the use of non-Canon cartridges are not covered under the warranty. The
amount remaining in the cartridge cannot be displayed correctly.(P. 712)
Remote scanning is restricted.(P. 713)
Scanning is restricted.(P. 713)
Set the correct authentication information.(P. 713)
Set the information necessary for authentication.(P. 713)
Specifying and registering new destinations is restricted.(P. 713)
The authentication server certificate has expired.(P. 714)
The authentication server certificate is incorrect.(P. 714)
The computer is restricted.(P. 714)
The encryption key is not set correctly. Check the encryption key settings.(P. 714)
The fax number has too many digits.(P. 715)
The memory is full.(P. 715)
The memory is full. Enter the original type settings again.(P. 715)
The memory is full. Scanning will be canceled. Do you want to print?(P. 715)
The number of entered characters is incorrect or invalid characters are used.(P. 716)
The USB memory is restricted.(P. 716)
Use Remote UI to set the information necessary for authentication.(P. 716)
●
If the problem persists even after trying the troubleshooting methods, contact your dealer or service
representative. If the Problem Persists(P. 728)
An error occurred during certificate verification.
An error occurred during verification due to an expired certificate or incorrect information.
Install the Correct Key and Certificate or CA Certificate.
Check the expiration date, certification authority, and other information, and then install the key and
certificate or CA certificate. Registering a Key and Certificate or CA Certificate Obtained from an
Are the Current Date and Time on the Machine Correct?
Check the date and time settings on the machine. If the settings are not correct, set the time zone, and then
set the current date and time. Setting the Date and Time(P. 436)
Troubleshooting
698