Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer User Manual
Page 197
2
Press [Other Volume Set.].
➠
The [Volume Settings] screen is displayed.
3
Select the item whose volume you want to adjust.
[Ring Tone]
Adjust the volume of the sound notifying you of incoming faxes.
[TX Done Tone]
Adjust the volume of the sound notifying you that sending of a fax is complete.
[RX Done Tone]
Adjust the volume of the sound notifying you that receiving of a fax is complete.
[Scanning Done Tone]
Adjust the volume of the sound notifying you that scanning of a fax original is complete.
4
Drag the slider to the left or right to adjust the volume, and press [Apply].
●
Dragging the slider to the right increases the volume.
●
Dragging the slider to the far left mutes the sound.
●
To emit a completion sound only when an error occurs, set [Sound Only When Error Occurs] to [On].
5
Press [Apply] [Apply].
➠
The volume is adjusted.
Setting the Notification Sounds for Operations and Statuses
You can also set whether the machine emits sounds notifying you of operations and statuses, such as when operating
the operation panel and errors are detected.
This section describes how to configure the settings using the operation panel.
You can also configure the settings using Remote UI from a computer. Managing the Machine from a Computer
1
Press the Sound Volume key ( ) on the operation panel. Operation Panel(P. 14)
➠
The [Fax Volume] screen is displayed.
Basic Operations
187