Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer - Manual (Page 658)

[Home] on the operation panel [Menu] [Adjustment/Maintenance] [Maintenance] [Control
Condensation] [On]
* During condensation removal, a blank sheet of paper may be output without being printed correctly. If you
set this to [On], you can set whether to restrict printing.
* If you set this to [On], you must keep the machine ON to continuously remove the condensation. The
automatic shutdown setting is disabled.
Is the Machine Installed in a Location Subject to Strong Wind Such as from an Air
Conditioner?
If so, adjust the air direction and volume of the air conditioner.
If that does not work, setting [Switch Paper Feed Method] to [Print Side Priority] may improve the problem.
[Home] on the operation panel [Menu] [Function Settings] [Common] [Paper Feed Settings]
[Switch Paper Feed Method] [Print Side Priority]
* When you select [Print Side Priority], the printing speed for 1-Sided printing will decrease.
Step4: Checking the Special Processing Setting
Is [Special Processing] Enabled?
If so, setting [Special Processing] below to [Off] may improve the problem. [Special Processing](P. 495)
● [Env. Flap Closing Prevention]
● [Paper Curl Correction]
● [Rdc Condens. (Consec 2-Sd Prt)]
● [Correct Uneven Gloss]
● [Correct Void]
[Home] screen on the operation panel [Menu] [Adjustment/Maintenance] [Adjust Image Quality]
[Special Processing]
Troubleshooting
648