Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer User Manual
Page 349
6
Click [OK].
➠
The settings are applied.
7
Log out from Remote UI.
●
When the AirPrint function is enabled, the following network settings are also enabled:
-
-
-
-
[Network Link Scan Settings](P. 485)
Setting the Functions and Security to Be Used with AirPrint
AirPrint uses the following protocols:
●
IPP (printing and sending faxes)
●
Network Link Scan (scanning)
The protocol to use varies with the function. Therefore, you can restrict the available functions by disabling the
protocols. In addition, you can configure the settings to encrypt communication with TLS and configure IPP
authentication when using a protocol.
Configure these settings using Remote UI from a computer. You cannot use the operation panel to configure the
settings.
Administrator privileges are required.
Required Preparations
●
When encrypting communication with TLS, specify the key and certificate to use for TLS encrypted
communication. Using TLS(P. 380)
1
Log in to Remote UI in System Manager Mode. Starting Remote UI(P. 438)
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of
Remote UI(P. 441)
3
Click [Network Settings] [IPP Print Settings] or [Network Link Scan Settings]
[Edit].
➠
The [Edit IPP Print Settings] screen or [Edit Network Link Scan Settings] screen is displayed.
4
Configure the IPP or Network Link Scan settings.
Linking with Mobile Devices
339