Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer - Manual (Page 114)

Restarting the Machine
84CU-040
When you make changes to the settings of the machine, you may have to restart the machine to apply the changes
depending on the setting.
When you change the settings using either the operation panel or Remote UI, you can restart the machine using the
power switch or Remote UI.
Restarting the machine deletes any data waiting to be printed.
Restarting the Machine Using the Power Switch(P. 104)
Restarting the Machine Using Remote UI(P. 104)
● The following data remains stored without being deleted even if the machine is restarted:
- Received data saved in the memory
- Data waiting to be sent
- Reports to be printed automatically after data is sent or received
Restarting the Machine Using the Power Switch
1
Press the power switch.
➠ The operation panel turns off, and the power turns OFF.
It may take a few minutes until the power turns OFF.
2
Wait at least 10 seconds after turning OFF the power before pressing the power
switch.
➠ The machine starts up.
Restarting the Machine Using Remote UI
Administrator privileges are required to restart the machine using Remote UI.
1
Log in to Remote UI in System Manager Mode. Starting Remote UI(P. 438)
Basic Operations
104