Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer - Manual (Page 219)

Preparing to Print from a USB Memory Device
84CU-0A4
Configure the settings to be able to print data from a USB memory device.
This section describes how to configure the settings using Remote UI from a computer.
On the operation panel, select [Menu] in the [Home] screen, and then select [Function Settings] to configure the
settings. [Memory Media Settings](P. 556)
Administrator privileges are required. The machine must be restarted to apply the settings.
1
Log in to Remote UI in System Manager Mode. Starting Remote UI(P. 438)
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of
Remote UI(P. 441)
3
Click [Store/Access Files Settings] [Memory Media Settings] [Edit].
➠
The [Edit Memory Media Settings] screen is displayed.
4
Select the [Memory Media Print] checkbox, and click [OK].
5
Restart the machine. Restarting the Machine(P. 104)
➠ The settings are applied.
Selecting an Operation When a USB Memory Device Is Connected
● You can configure the settings to display a screen for selecting and immediately executing an operation
(scanning from a USB memory device or Memory Media Print) when a USB memory device is inserted into
the machine.
Log in to Remote UI in System Manager Mode [Settings/Registration] [Store/Access Files
Settings] [Edit] in [Display Screen When Memory Media is Connected] select the [Display
Screen When Memory Media is Connected] checkbox [OK]
Using the operation panel, configure the settings in the [Home] screen from [Menu] [Function Settings].
[Screen When Mem. Med. Conn](P. 556)
Printing
209