Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer - Manual (Page 532)

[PDF]
[XPS]
[Imaging]
[Color Mode]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify whether to automatically switch between color printing and black and white printing according to the print
data, or use black and white printing for all print data.
[ Auto (Color/B&W) ]
[Black & White]
[Compressed Image Output]
[Menu] [Function Settings] [Printer] [Printer Settings]
If the machine runs short of memory during printing, image quality may suffer. Specify whether to continue
printing when this occurs.
● To continue printing even with degraded image quality, specify [Output] in this setting.
● To stop printing and display an error when image quality is severely degraded, specify [Display Error].
[ Output ]
[Display Error]
[Prioritize MP Tray]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify whether to give priority to paper feeding from the multi-purpose tray over feeding from the paper drawer
when the machine automatically selects the correct paper source for the size of the paper to be printed.
If you specify [On] in this setting and the same paper is loaded into both the multi-purpose tray and the paper drawer,
paper is fed from the multi-purpose tray.
[ Off ]
[On]
[UFR II]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify the print data processing method used when the UFR II Printer Driver is used.
[Halftones]
[Menu] [Function Settings] [Printer] [Printer Settings] [UFR II]
Specify the print method used to reproduce halftones (intermediate areas between light and dark areas)
according to the print data content.
To Print Data with Fine Lines and Small Text (such as CAD Data)
Set [Error Diffusion] to [On].
* Only applicable if [Resolution] is set to [600 dpi]. [Resolution](P. 517)
* Specifying [On] in this setting may lower the stability of toner fixing and textures.
Settings Menu Items
522