Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer - Manual (Page 459)

Changing the Report and List Print Settings
84CU-02W
Reports and lists are printed on paper on one side by default. You can change the setting to print on both sides. You
can also change the setting to automatically print communication results reports.
Use the operation panel to configure the settings. You cannot configure the settings using Remote UI from a
computer.
1
On the operation panel, press [Menu] in the [Home] screen. [Home] Screen(P. 111)
2
Press [Output Report] [Report Settings].
➠ The [Report Settings] screen is displayed.
3
Change the report and list print settings.
To Print Reports and Lists on Both Sides
1
Press [Default Settings for Report Output].
➠ The [Default Settings for Report Output] screen is displayed.
2
Set [2-Sided Printing] to [On], and press [Apply].
To Change the Communication Management Report Settings
1
Press [Communication Management Report].
➠ The [Communication Management Report] screen is displayed.
2
Configure the report settings.
● To print automatically after every 40 communication events, set [Auto Print (40 Transmissions)] to
[On].
● To configure the settings to print sending and saving results and receiving results in a different
format, set [Separate TX/RX] to [On].
3
Press [Apply].
To Change the Fax TX Result Report Settings
1
Press [Fax TX Result Report].
➠ The [Fax TX Result Report] screen is displayed.
2
Select whether to print this report automatically.
● To print automatically after each send job, select [On]. To print automatically only when an error
occurs, select [Only When Error Occurs].
Managing the Machine
449