Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer User Manual

Page 728

#003

The data volume is too large to send or receive a fax.

Divide the Original or Lower the Resolution.

Cannot Send a Fax

●

When sending an original with many pages, divide the original and send it.

●

Change the set resolution to a lower resolution when scanning the original.

[Home] screen on the operation panel [Fax] [TX/RX Settings] tab [Resolution]
select the resolution.

Cannot Receive a Fax

Ask the sender to divide the original or lower the resolution and send the fax again.

#005

There was no response from the other party's device within the time limit.

Did You Specify an Overseas Destination?

You may not have been able to connect correctly to the destination. After entering the international access

number or country code, enter the wait time (pause) or lower the communication start speed before sending

Is the Other Party's Device Ready to Receive a Fax?

The power of the other party's device may not be turned on, or the RX Mode may not be configured correctly.

Have the other party check these.

#012

The receiving device is out of paper (recording paper).

Have the other party add more paper.

#018

There was no response from the other party's device due to it being busy or another reason.

Did You Specify an Overseas Destination?

You may not have been able to connect correctly to the destination. After entering the international access

number or country code, enter the wait time (pause) or lower the communication start speed before sending

Is the Other Party's Device Ready to Receive a Fax?

The power of the other party's device may not be turned on, or the RX Mode may not be configured correctly.

Have the other party check these.

#022

Sending of faxes from a computer is restricted. Alternatively, the destination specified as the forwarding destination

may have been deleted from the Address Book.

To Cancel Restriction of Sending Faxes from a Computer, Change the [Fax TX Settings] Setting.

Troubleshooting

718