Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer - Manual (Page 531)

[Offset Short Edge] or [Offset Long Edge]
[Menu] [Function Settings] [Printer] [Printer Settings] [Layout]
Offset the print position of text and images. Use this setting when the printed text and images are shifted
towards one edge of the paper or when they extend beyond the print range.
Specify the offset width as a positive (+) or negative (-) value in 0.01" (0.5 mm) increments for each paper edge
direction and print side.
To Offset Along the Short Edge (Horizontally)
Specify the adjustment width by selecting a positive (+) value to adjust to the right on the paper or a negative
(-) value to adjust to the left on the paper.
To Offset Along the Long Edge (Vertically)
Specify the adjustment width by selecting a positive (+) value to adjust down on the paper or a negative (-)
value to adjust up on the paper.
-2.00 to 0.00 to +2.00 (inches) or -50.0 to 00.0 to +50.0 (mm)
[Auto Skip Error]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify whether to continue printing if an error occurs during printing.
It is recommended that the [Off] setting normally be used so that printing stops when an error occurs.
[ Off ]
[On]
[Timeout]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify the time from the start of waiting to receive print data until reception times out when print data reception is
interrupted.
5 to 15 to 300 (sec.)
[Personality]
[Menu] [Function Settings] [Printer] [Printer Settings]
This should normally be set to [Auto], in which the machine automatically identifies the received print data and
switches to the appropriate operating mode.
If the machine doesn’t switch to the appropriate operating mode for some reason (such as an unknown print data
format), set the operating mode manually.
[ Auto ]
Settings Menu Items
521