Fluke Biomedical 601PRO XL - Manual (Page 97)

T E S T R E C O R D S
5 - 3
2. Test Data Record: Serial Output
Refer to Appendix D for a description of ASCII character formatting.
3. Printing Test Records
The 601PRO is equipped with a parallel printer port that allows the instrument to be
connected to a compatible external printer for full-format printing of test results. In
addition, an optional internal printer allows for simple documentation of test results.
Refer to the Accessories list in Chapter 1 for information on ordering a D25M-C36M
parallel printer cable for use with an external printer or additional rolls of paper for
the optional internal printer.
Printing can be performed during testing in the
Auto, Step , or Manual modes. If an
external printer is attached, and control numbers are assigned to test records, a
Summary Report of all data gathered during
Auto or Step mode testing could be
saved and printed.
In Manual mode tests, pressing the print data key sends a description of the present
test and its associated measurement to the specified printer. During Auto or Step
mode, test results can be automatically printed at the conclusion of the test.
In Manual mode tests or while in the Main Menu , pressing the print header key
provides a header that the operator may use to enter the date, time, and device
information.
Refer to Appendix C for information on printer maintenance.
4. Deleting Test Records
• From the MAIN MENU , press UTILITIES .
• Press TEST RECORDS .
baw108f.eps