Fluke Biomedical 601PRO XL - Manual (Page 83)

A U T O / S T E P M O D E S
4 - 3
baw069f.eps
To enter a control number for a device record or a template name currently stored
in the 601PRO’s database, use a combination of the SOFT KEYS for alphanumeric
and special characters, and the test-shortcut keys for numeric keys. Press ENT when
the control number has been entered .
The control number or template name , if entered, is displayed along with the Test
Standard and Class/Type designations that will determine the tests to perform and
their limits. When the DUT is connected and ready for testing, press START TEST
(SOFT KEY 1) .
baw070f.eps
If a control number or template name is not found in memory, create a device
record or template as follows:
• From the 601PRO
MAIN MENU , press TESTS/AUTOMODES, then select either
AUTO mode or STEP mode and press ENT .
• Enter a control number or template name and press ENT at the following
screen:
baw071f.eps