Fluke Biomedical 601PRO XL - Manual (Page 34)

6 0 1 P R O S E R I E S
X L
2 - 1 0
9. Selecting the DC Option
The DC option permits the operator to disable all DC readings, allowing the
Auto/Step sequences to run faster. This applies to all sequences, including
Custom, and all modes (Auto/Step/Manual) , except for IEC 1010 sequences
and Computer Control . The 601PRO SERIES
XL
units are supplied with DC
readings disabled .
• To enable/disable DC readings: From the 601PRO MAIN MENU, press
SYSTEM SETUP to access the Select Setup Function menu. Press
*MORE until the following menu is displayed, then press DC :
baw030f.eps
• Press YES or NO at the following menu:
baw020f.eps
Default Setting: No