Fluke Biomedical 601PRO XL - Manual (Page 25)

2-1
Setting Up the 601PRO
This chapter describes the factory default settings and how to change them,
and provides instructions for one-time customization of the 601PROXL using
the SYSTEM SETUP key and the Select Setup Function menu.
1. Using Factory Default Settings
2. Selecting the Test Standard
3. Selecting the Printer Output
4. Selecting the RS232 Baud Rate
5. Activating the Beeper
6. Setting the Time and Date
7. Configuring the Enclosure Leakage for the Auto
Mode Sequence
8. Selecting Language Options
9. Selecting the DC Option
10. Selecting the Auto/Step Tests: Controlled Power
Sequences or 601CE Conventional Test
Sequences
11. Enabling Stop on Failure
12. Configuring for Device Records or Templates
1. Using Factory Default Settings
The factory default settings are shown below.
Description Factory Default Setting
Test Standard IEC 601-1 (Class I, BF)
Number of Applied Parts 0 (To change, refer to Chapter 3)
Printer Output Internal
RS232 9600 Baud
Beeper On
Time Format
24 hour
Date Format MDY
Enclosure Leakage (multiple readings
during the Auto Mode sequence) Off
Keyboard Language English
Display/Print Language English
DC Readings Off
Auto/Step Sequences: Controlled Power
Sequence On
Stop on Failure Off
DEV RECS / TEMPLATES DEVICE REC
Chapter
2