Fluke Biomedical 601PRO XL - Manual (Page 152)

6 0 1 P R O S E R I E S
X L
1 0 - 4
Computer Control Commands
ENTER DESCRIPTION
COMMAND DESCRIPTION NOTES
[QUI] Quit COM session Bi-Directional
[Q] Quit COM session Bi-Directional
[RET] Return Result of Last Test
[R] Return Result of Last Test
[ACS] Abort COM Session Bi-Directional
[VER] Version of 601PRO
[SN] Serial Number
[FVER] Returns Functionality Version
[PRT] Print last test result to printer
[PRI] Print Header to current printer
[PRE] Print Header to current printer
Calibration Check Commands
COMMAND DESCRIPTION NOTES
[CHK] Calibration Check
Returns "PASS*" or "FAIL*" for each test’s RESISTANCE, LEAKAGE; i.e., "PASS*FAIL*" indicates RESIST
passed, LEAKAGE failed.
Outlet Control Commands
COMMAND DESCRIPTION NOTES
[RPL] Reverse Polarity Turns DUT outlet ON
[NPL] Normal Polarity Turns DUT outlet ON
[CER] Closed Earth
[OER] Open Earth
[CL2] Closed L2
[OL2] Open L2
[OFF] DUT Outlet OFF
[ON] DUT Outlet ON
The DUT [ON] command always sets the outlet to Normal Polarity, Closed L2, Closed Earth. Note: The DUT
outlet polarity can be switched from Reverse Polarity to Normal Polarity with the [ON] command. To prevent
transients, the outlet control relays turns the outlet off; then, after a short delay, it turns the outlet back on with
new polarity.