Fluke Biomedical 601PRO XL - Manual (Page 54)

6 0 1 P R O S E R I E S
X L
3 - 1 4
When in the MAIN MENU or any manual test, the operator may also select a manual test
by pressing the test-shortcut keys as indicated in the following table.
Test-Shortcut
Key
Manual Test Selected
0 Mains Voltage and Dual Lead Voltage
1 Current Consumption
2 Insulation Resistance
3 Protective Earth Resistance
4 Earth Leakage Current
5 Enclosure Leakage Current
6 Patient Leakage Current
7 Mains on Applied Part Leakage Current
8 Patient Auxiliary Current
9 IEC 1010 Accessible Voltage and
IEC 1010 Accessible Leakage Current
/ VDE Equivalent Device Leakage Current
- VDE Equivalent Patient Leakage Current
In addition to the above tests, Dual Lead Leakage and ECG Output can be accessed
through the manual test menus by pressing TESTS/AUTOMODES , then MANUAL , then
*MORE until the tests are displayed. These tests are not accessible from the test-
shortcut keys.
Additional Features
• From the MAIN MENU or any manual test, press the print header key to print a
test header to the selected printer.
• When the MAIN MENU is displayed, the DUT outlet is OFF (L1, L2 and Earth
are open).
• The current standard is displayed on the
MAIN MENU and may be changed by
selecting SYSTEM SETUP then TEST STANDARD , or by pressing the view
present settings key. Refer to Chapter 8, Standards and Principles, for details.
• The current class/type is displayed on the MAIN MENU and may be changed by
selecting CLASS/TYPE or by pressing the view present settings key. Refer to
page 3-8 in this chapter, or Chapter 2, Setting Up the 601PRO, for details.