Fluke Biomedical 601PRO XL - Manual (Page 56)

6 0 1 P R O S E R I E S
X L
3 - 1 6
Shortcut Key 0: Mains Voltage Test and Dual Lead Voltage Test
This test can be initiated either from the test-shortcut keys or the MAIN MENU . The
Mains Voltage Test measures and displays the Mains voltages from L1 to Earth, L2
to Earth, and L1 to L2. The Dual Lead Voltage Test measures the voltage between
the RED and BLACK inputs.
Important: Power to the 601PRO front panel outlet is off during the Mains Voltage
Test, and on during the Dual Lead Voltage Test.
To measure the mains voltage (L1-EARTH, L2-EARTH, L1-L2), press shortcut key
0 or press TESTS/AUTOMODES from the Main Menu , then MANUAL and then
select MAINS VOLTAGE .
• The Mains Voltage test appears on the display, and the test begins immediately.
Display voltages are continuously updated until another test is selected.
baw047f.eps
• Press the print data key at any time to generate a printout of the latest
measurement(s) .
• Press previous or esc/stop at any time to return to the MAIN MENU.
Dual Lead Voltage Test
To initiate the Dual Lead Voltage test, select DUAL LEAD from the Mains Voltage
test, or select the Dual Lead Voltage Test from the MAIN MENU .
The Dual Lead Voltage test appears, and the test begins immediately. Display values
are continuously updated until another test is selected.
baw048f.eps
To take a Dual Lead Voltage measurement:
• Apply the voltage to be measured to the RED and BLACK terminals.
• Press the
print data key at any time to generate a printout of the latest
measurement(s) .