Pilz PSS SB HYD, Basic license - Manual (Page 95)

Modular Block System: Hydraulic Presses 6-33
• MRun: Machine is running
MEin = 0:
Machine standing
MEin = 1: Machine is running
MEin = 1/0-pulse edge: Activate reset lock.
This parameter can force the operator to carry out a function
test of the gate (gate open/closed).
The reset lock is lifted by carrying out a function test on the
gate followed by the
RSET signal.
• AuSt: Automatic start/start-up disabler
AuSt = 0: Start-up disabler (initial reset is required)
AuSt = 1: Automatic start/no start-up disabler on PSS cold/
warm start or when starting the I/O-Group; only
effective in conjunction with
NoFT = 1 (see also
under “Operating modes”)
• ARSt: Automatic restart/reset lock
ARSt = 0:
Reset lock (reset is required)
ARSt = 1: Automatic restart/no reset lock
(see also under “Operating modes”)
• NoFT: Function test on the gate
NoFT = 0:
Function test required on the gate
NoFT = 1: Cold/warm start without function test on the gate
(see also under “Operating modes”)
• RSET: Reset input
RSET = 0/1 pulse edge:
- Reset errors or
- Reset start-up disabler or
- Reset reset lock