Pilz PSS SB HYD, Basic license - Manual (Page 15)

1-1 Modular Block System: Hydraulic Presses
This manual describes how to manage the standard function blocks in the
“MBS Hydraulic Presses” software package in accordance with their
intended use.
Standard function blocks in the “MBS Hydraulic Presses” package are part
of the Pilz MBS Modular Block System. They can be used in the failsafe
section of a PSS-range programmable safety system.
To fully understand this manual you will need to be conversant with the
information found in the general documentation for the PSS-range
(System Manual, Installation Manual for the modular/compact PSS, PSS
SW PG Programming Manual/PSS WIN-PRO Programming Manual).
In particular you should refer to the following documents from the System
Manual:
• Safety Manual
• FS System Description
• Error List
To fully understand the bus-specific requirements and correlations for
SafetyBUS p applications you will need some knowledge of the design and
management of SafetyBUS p.
Knowledge of the safety regulations for the particular area of application is
assumed.
This installation manual is intended for instruction and should be retained
for future reference.
Introduction