Pilz PSS SB HYD, Basic license - Manual (Page 195)

Modular Block System: Hydraulic Presses 6-133
Settings for the parameters TOn and TOff
Poppet valves
I/P Parameter TOff = 0 0< TOff
max
VTyp = 1
TOn = 0 Reaction time is not Reaction time is monitored
monitored when the valve when the valve is
switches on or off switched off
0< TOn
max
Reaction time is Reaction time is
monitored when the valve monitored when the valve
is switched on is switched on and off
Directional control valves
I/P Parameter 0< TOff
max
VTyp = 0
0< TOn
max
Reaction time is monitored when the valve is
switched on and off
Setting reaction times
Reaction times (entered under input parameters TOn and TOff) may be
set as follows:
• Select a low value (e.g. 10 ms)
• Increase the value step by step (max. 10 ms steps), until it is clear that
the valve operates safely and correctly.
This will ensure that reaction times correspond to the actual values of the
valve.