Pilz PSS SB HYD, Basic license - Manual (Page 295)

9-7 Modular Block System: Hydraulic Presses
Changes from Version 1.0 to Version 1.1
• Transposition of error bit 12 and 13 rectified
• Automatic start now possible when PSS cold/warm starts
i.e. no start-up disabler, no function test and no reset required.
SB067: Feedback loop monitoring (RFK)
Version Date CRC
1.0 04.06.96 F309
1.1 30.05.97 71A5 STOP
Changes from Version 1.0 to Version 1.1
• Transposition of error bits 04 and 05 rectified
• Transposition of error bits 06 and 07 rectified
• Notation of input parameter “ SSNr ”changed to “ SSNR”.
SB068: Monitoring ESPE/AOPDs with guarding function
Version Date CRC
1.0 10.10.95 148E
1.1 31.07.97 A3A0
STOP
1.2 21.01.68 6509 STOP
1.3 07.05.98 4724
Changes from Version 1.0 to Version 1.1
• Name changed from “BWS_ÜW” to “BWS_AOS”
• When the protected field is clear, the SB now expects two 1-signals from
the ESPE/AOPD (version 1.0: one 0-signal and one 1-signal)
This means that input parameters
BWSö and BWSs have been replaced
by input parameters NO_1 and NO_2.