Pilz PSS SB HYD, Basic license - Manual (Page 226)

6-164 Modular Block System: Hydraulic Presses
Standard Function Blocks SB097
SB097: Monitoring muting lamps
Block header
Input parameters
• SSNR: Safety subroutine number
Permitted value range: 1 ... 200
Format: Byte constants KB001 ... KB200
• GRP: On SafetyBUS p applications:
Assign the status flag of the I/O-Group containing inputs
FbL1
and FbL2 (M 116.00 for I/O-Group 0 to M 116.31 for
I/O-Group 31).
On non-SafetyBUS p applications::
Assign RLO-1 (M 110.01)
• ON: Enable signal for muting lamps “ON”
ON = 1: Switch on muting lamps
ON = 0: Switch off muting lamps
This input should be assigned the output signal MAct from
SB 072 (Muting).
• FbL1: Feedback input for monitoring filament 1
(Feedback Loop 1)
• FbL2: Feedback input for monitoring filament 2
(Feedback Loop 2)
• RSET: Input for acknowledging error messages (Reset)
RSET = 0/1-pulse edge: Delete all error entries when the faults
have been rectified.
SB097
MUT_LAMP
B - SSNR
X - GRP
X - ON
X - FbL1
X - FbL2
X - 1OUT
X - RSET ENBL - X
WARN - X
LMP1 - X
LMP2 - X