Pilz PSS SB HYD, Basic license - Manual (Page 304)

9-16
Appendix
Modular Block System: Hydraulic Presses
Changes from Version IV to Version V
The operating manual was revised. The functionality of SB059, SB072 and
SB080 has changed and SB062 was newly incorporated into the package.
Other amendments are listed in the table below.
Old New Change
page page
4-5 4-5 Not to use temporary flags as output parameters
– 4-6 Assignment of input and output parameters
4-45 4-49 Description of input parameter CyRs
4-116 4-122 Information on NC and NO added
6-2 6-2 Block diagram: FG on SB 074 now goes directly to the
static enable StFG
– 6-4 Example for SB 062 added
6-38 – Example “ESPE/AOPD in double break mode with cycle
reset via the enable signal (on press return)” deleted
Changes from Version V to Version VI
The operating manual was revised and the chapters restructured.
New: Chapter 2 Overview and Chapter 5 MBS Basics.
Standard function blocks SB063, SB064, SB065 and SB071 have been
added to the block package.
Changes in Version 19 203-07
The operating manual was revised. The functionality of SB 069 was
changed. The blocks SB075 and SB086 were newly incorporated into the
package.